현재 우리나라의 대부분의 도시와 시골 거리에 태양광 가로등이 설치되어 있습니다. 태양광 가로등은 에너지를 절약할 수 있는 새로운 형태의 가로등으로 사회에서 널리 인정받았고 국가에서도 이를 지원하기 위해 막대한 인력과 물적 자원을 투자했습니다. 태양광 가로등이 장기적으로{0}}양호한 발전을 하도록 하려면 태양광 가로등 배터리 모듈에 영향을 미치는 성능 매개변수는 무엇인가요?
(1) 단락전류(Isc)
When the solar cell is placed under the illumination of a standard light source and the output end of the solar cell module is short-circuited, the current flowing through both ends of the solar cell is the short-circuit current of the cell module. The method of measuring the short-circuit current is to connect the two ends of the solar cell with an ammeter whose internal resistance is less than 1Ω. The short-circuit current varies with the light intensity.
(2) 피크 전류(Im)
피크 전류는 최대 작동 전류 또는 최적 작동 전류라고도 합니다. 피크 전류는 태양전지 모듈이 최대 전력을 출력할 때의 동작 전류를 말하며, 피크 전류의 단위는 A이다.
(3) 피크 전압(Um)
피크 전압은 최대 작동 전압 또는 최적 작동 전압이라고도 합니다. 피크 전압은 태양 전지가 최대 전력을 출력할 때의 작동 전압을 말하며, 피크 전압의 단위는 V입니다. 모듈의 피크 전압은 직렬 셀 수의 증감에 따라 달라집니다. 36개의 셀이 직렬로 연결된 모듈의 피크 전압은 17-17.5V입니다.
(4) 개방 회로 전압(Uoc)
광원의 조명 아래에서 양쪽 끝이 열려 있을 때(태양 전지 모듈의 양극과 음극이 부하에 연결되지 않음) 태양 전지의 출력 전압은{0}개회로 전압입니다. 개방전압의 단위는 V이다. 태양전지 모듈의 개방전압은 직렬 셀의 증감에 따라 변한다. 36개의 셀이 직렬로 연결된 모듈의 개방 회로 전압은 약 21V입니다. 배터리의 개방 회로 전압은 높은 내부 저항 DC 밀리볼트미터로 측정할 수 있습니다.
(5) 최대 출력 전력
선택한 부하 저항 값이 출력 전압과 전류의 곱을 최대화할 수 있는 경우 최대 출력 전력을 얻을 수 있으며 이는 기호 Pm으로 표시됩니다. 이 때의 작동 전압과 작동 전류를 최적 작동 전압과 최적 작동 전류라고 하며 각각 Um 및 Im 기호로 표시됩니다. Pm{0}}UmIm
정격전압과 정격전류의 곱이 정격전력입니다. 정격 출력은 정상 조건(장시간 작동 가능)에서의 최대 출력입니다. 태양 전지의 정격 출력은 변환 효율과 관련이 있습니다. 일반적으로 단위 면적당 배터리 모듈의 변환 효율이 높을수록 출력 전력이 커집니다. 태양 전지의 현재 변환 효율은 일반적으로 14%에서 17% 사이입니다. 셀 제곱센티미터당 출력 전력은 14~16mW이고, 태양전지 모듈의 제곱미터당 출력 전력은 약 120W이다.
(6) 피크 전력(Pm)
Peak power is also called maximum output power or optimum output power. Peak power refers to the maximum output power of the solar cell module under normal working or test conditions, that is, the product of the peak current and the peak voltage: Pn=ImUm. The unit of peak power is watts. The peak power of a solar cell module depends on the solar irradiance, the solar spectral distribution and the operating temperature of the module, so the measurement of the solar cell module should be carried out under standard conditions. The test standard of solar cells: the spectral distribution when the air quality is AM1.5 (for specific regulations, please refer to the relevant national and international standards in my country), the solar radiation emitted by humans is 1000W/m², and the temperature is 25 degree . The output power of the solar cell under this condition is defined as the peak power of the solar cell.
(7) 필 팩터(ff)
개방 전압과 단락 전류의 곱에 대한 태양 전지 모듈의 최대 전력{0}비{1}를 나타냅니다. f{{2}Pm/(IsU.) . 이는 부하에 따른 배터리 출력 전력의 변화 특성을 반영하며, 충전율은 태양전지의 장단점을 특성화하는 중요한 매개변수 중 하나이다. 필 팩터가 클수록 태양 전지 성능이 향상됩니다.
